Prenfish Fish Toxicant

Zoecon · Rotenone 5%; Cube Resins other than rotenone 3.5% · EPA Reg 89459-85 · pesticide_other Document last checked 2021-01-27

← Back to Prenfish Fish Toxicant product overview

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. · EPA registration data for Reg. 89459-85 →

This product contains 5% rotenone as the active ingredient. It is used to control fish in outdoor streams. To apply, drip the product into the flowing portion of the stream for 4 to 8 hours, using multiple application sites spaced approximately ½ to 2 miles apart.

Pests covered (1)

fish

Areas treatable (8)

streamsAERIAL APPLICATIONLAKES (WATER TREATMENT)PONDS (WATER TREATMENT)RESERVOIRS (WATER TREATMENT)RIVERS (WATER TREATMENT)STREAMS (WATER TREATMENT)TANK MIX

How to treat each type of area 3

streams

Normal

Target pest	Location	Rate	Unit	Dilution	Label notes
fish	Outdoor	0.025 – 0.05	ppm	undiluted for flows > 25 ft3/s (> 0.708 m3/s); diluted for flows < 25 ft3/s (< 0.708 m3/s)	Apply rotenone as a drip for 4 to 8 hours to the flowing portion of the stream. Multiple application sites are used along the length of the treated stream, spaced approximately ½ to 2 miles apart.

Tolerant Species

Target pest	Location	Rate	Unit	Dilution	Label notes
fish	Outdoor	0.5 – 1.0	ppm	undiluted for flows > 25 ft3/s (> 0.708 m3/s); diluted for flows < 25 ft3/s (< 0.708 m3/s)	Apply rotenone as a drip for 4 to 8 hours to the flowing portion of the stream.

Tolerant Species in Organic Waters

Target pest	Location	Rate	Unit	Dilution	Label notes
fish	Outdoor	2.0 – 4.0	ppm	undiluted for flows > 25 ft3/s (> 0.708 m3/s); diluted for flows < 25 ft3/s (< 0.708 m3/s)	Apply rotenone as a drip for 4 to 8 hours to the flowing portion of the stream.

Mixing instructions 6

For pests	Location	Amount	Per	Finished strength	Label notes
fish	Outdoor	1 gallon	18.4 to 9.2 ft3/s (4-hr) or 9.2 to 4.6 ft3/s (8-hr)	0.5 – 1.0 ppm	Product (5% A.I.)
fish	Outdoor	1 gallon	9.2 to 3.1 ft3/s (4-hr) or 4.6 to 1.6 ft3/s (8-hr)	1.0 – 3.0 ppm	Product (5% A.I.)
fish	Outdoor	1 gallon	4.6 to 2.3 ft3/s (4-hr) or 2.3 to 1.2 ft3/s (8-hr)	2.0 – 4.0 ppm	Product (5% A.I.)
fish	Outdoor	1 liter	0.138 to 0.069 m3/s (4-hr) or 0.069 to 0.034 m3/s (8-hr)	0.025 – 0.05 ppm	Product (5% A.I.)
fish	Outdoor	1 liter	0.069 to 0.024 m3/s (4-hr) or 0.034 to 0.013 m3/s (8-hr)	1.0 – 3.0 ppm	Product (5% A.I.)
fish	Outdoor	1 liter	0.034 to 0.018 m3/s (4-hr) or 0.018 to 0.008 m3/s (8-hr)	2.0 – 4.0 ppm	Product (5% A.I.)

Label SDS

Catalog source document available. The local copy is still withheld until its exact product identity, role, and full file hash are accepted. Open the catalog source label ↗ and verify the product name, EPA registration number, and revision before relying on it.

Publication withheld. This catalog record has no active evidence summary, so its document and any extracted directions remain unavailable while identity and document role are reviewed.

Document text and citations

Extracted text is retained internally for document review and page-level citation checks. The complete third-party text is not republished here; use the document viewer above.

Reference only. Always read and follow the most current EPA-approved label on the product container. State and local restrictions may apply that are not reflected in this digitised copy. Verify the EPA registration number and revision date before use.