← Back to COOL POWER SELECTIVE HERBICIDE product overview
| Target pest | Location | Rate | Unit | Dilution | Label notes |
|---|---|---|---|---|---|
| weeds growing in lawn planted to Bluegrass, Fescue, Rye, Bent (excluding golf greens and tees), Bahia, Bermuda, and Zoysia | Outdoor | 1.0 to 1.25 | fl. oz. | 2 gallons to 5 gallons of water | Use the higher rate for hard-to-control weeds. When treating warm season lawn that is completely dormant, the higher rates may be used. When treating warm season lawn that is actively growing, use a lower rate. Do not overlap spray patterns; Use reduced rates if grass is stressed from heat, drought, etc. Do not apply more than 1.47 fl. oz. per 1,000 sq. ft. per year. Do not apply more than 2 applications per year (at a rate of 0.73 fl. oz. per 1,000 sq. ft.) with a minimum retreatment interval of 21 days. |
| Centipede or St. Augustine grasses | Outdoor | not to exceed 1.25 | fl. oz. | per 1,000 sq. ft. | Avoid application to Centipede or St. Augustine grasses unless injury to lawn can be tolerated. The suitable use of SPURGE POWER® on these non-recommended lawn species may be determined by treating a small area at any rate/1,000 sq. ft. which does not exceed 1.25 fl. oz./1,000 sq. ft. Prior to treatment of larger areas, the treated area should be observed for any sign of injury to lawn for a period of 30 days of normal growing conditions to determine the phytotoxicity and efficacy to the treated area. |
| For pests | Location | Amount | Per | Label notes |
|---|---|---|---|---|
| weeds growing in lawn planted to Bluegrass, Fescue, Rye, Bent (excluding golf greens and tees), Bahia, Bermuda, and Zoysia | Outdoor | 1.0 to 1.25 | fl. oz. | Add one-half the required amount of water to the spray tank, then add this product with agitation, and finally the balance of the water with continued agitation. This material forms an emulsion in water - not a solution. This tends to separate on standing. Provide agitation to prevent such separation and ensure a uniform mixture. Mix with 2 gallons to 5 gallons of water per 1,000 sq. ft. |