CYPER WSP

CONTROL SOLUTIONS, INC. · Cypermethrin 40% · EPA Reg 53883-340 · INSECTICIDE Document last checked 2018-06-19

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. · EPA registration data for Reg. 53883-340 →

Cyper WSP is a water-soluble powder used to control various insects and termites, including subterranean, Formosan, and drywood varieties. It is applied as a perimeter barrier around structures, injected into wood voids, galleries, or infested cavities in trees, utility poles, and fence posts, or sprayed to target termites in mud shelter tubes. Methods of application include mixing the powder with water, creating emulsions, or using a crack and crevice injector, coarse fan spray, or pointed injection tool.

Pests covered (35)

insectssubterranean aerial colonies, Formosan aerial colonies or drywood termitesworkers and winged reproductive forms of termitestermites active inside trees, utility poles and/or fence postsTermite carton nests in trees or building voidsPILLBUGSSOWBUGSCENTIPEDESMILLIPEDESSCORPIONSSPIDERSMITESTICKSELM LEAF BEETLEFLIESMOSQUITOESEARWIGSTERMITESDRYWOOD TERMITESBEESWASPSANTSCARPENTER ANTSFIRE ANTCARPENTER BEEBOXELDER BUGAPHIDSSOD WEBWORMSFLEASFIREBRATSILVERFISHCALIFORNIA OAKWORMCOCKROACHESCRICKETSCHIGGERS (REDBUGS)

Areas treatable (31)

Perimeter Barrier Application around Structuresvoids and galleries in damaged wood and in spaces between wooden members of a structure and between wood and foundationsattics, crawl spaces, unfinished basements, or man-made voidsinterior infested cavitytrees or building voidsHOSPITALS (RESIDUAL CRACK AND CREVICE TREATMENT)STORAGE AREASWOOD ATTICSUTILITY POLES (INJECTION TREATMENT)WINERIESLOCKER ROOM PREMISESFOOD PROCESSING PLANTS (RESIDUAL CRACK AND CREVICE TREATMENT)FOOD PROCESSING AREAS (RESIDUAL CRACK AND CREVICE TREATMENT)APARTMENT BUILDINGS (INDOOR)BASEBOARDSCLOSETSPLUMBING INSTALLATIONSBUILDING FOUNDATIONSEAVESPATIOSPORCHESWINDOW FRAMESHOTELS/MOTELS/TOURIST COURTS (NON-FOOD AREAS)FACTORIES (OUTDOOR INEDIBLE)FOOD HANDLING ESTABLISHMENTS (RESIDUAL CRACK AND CREVICE TREATMENT)FOOD MARKETING/STORAGE/DISTRIBUTION FACILITIES (RESIDUAL CRACK AND CREVICE TREATMENT)BUILDINGS (EXTERIOR)FACTORIES (INDOOR INEDIBLE)EATING ESTABLISHMENTS (RESIDUAL CRACK AND CREVICE TREATMENT)AIRCRAFT (FEED/FOOD-EMPTY)ORNAMENTAL LAWNS (FOLIAR TREATMENT)

How to treat each type of area 6

Perimeter Barrier Application around Structures

Target pest	Location	Rate	Unit	Dilution
insects	Outdoor	1 packet (0.33 oz.)	800-1,600 sq. ft.	1-5 gal. of Water
insects	Outdoor	2 packet (0.66 oz.)	800-1,600 sq. ft.	1-5 gal. of Water

voids and galleries in damaged wood and in spaces between wooden members of a structure and between wood and foundations

localized areas of infested wood structures

Target pest	Location	Rate	Unit	Label notes
subterranean aerial colonies, Formosan aerial colonies or drywood termites	Both	0.1%	emulsion	Application may be made to inaccessible areas by drilling, and then injecting the emulsion with a crack and crevice injector into the damaged wood or void spaces.

attics, crawl spaces, unfinished basements, or man-made voids

Target pest	Location	Rate	Unit	Label notes
workers and winged reproductive forms of termites	Both	0.1%	solution	Application may be made with a coarse fan spray to control workers and winged reproductive forms of termites in mud shelter tubes. This type of application is not intended to be a substitute for soil treatment for extensive infestation of drywood termites or other wood-infesting insects.

interior infested cavity

Target pest	Rate	Unit	Label notes
termites active inside trees, utility poles and/or fence posts	0.1%	solution	drill to find the interior infested cavity and inject 0.1% solution using treatment tool with a splash back guard.

trees or building voids

Target pest	Rate	Unit	Label notes
Termite carton nests in trees or building voids	0.25%-0.50%	solution	may be injected with a pointed injection tool. Multiple injection points to varying depths may be necessary. It is desirable to physically remove carton nest material from building voids when such nests are found.

Mixing instructions 16

For pests	Amount	Per	Label notes
Perimeter Barrier Applications (Low Rate)	5 packets	5 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (Low Rate)	10 packets	10 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (Low Rate)	50 packets	50 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (Low Rate)	2.5 packets	5 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (Low Rate)	5 packets	10 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (Low Rate)	25 packets	50 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (Low Rate)	1 packet	5 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (Low Rate)	2 packets	10 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (Low Rate)	10 packets	50 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (High Rate)	10 packets	5 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (High Rate)	5 packets	10 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (High Rate)	2 packets	50 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (High Rate)	20 packets	50 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (High Rate)	10 packets	100 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (High Rate)	4 packets	50 gallons	1 packet = 0.33 oz. (9.5 gms)
Perimeter Barrier Applications (High Rate)	20 packets	100 gallons	1 packet = 0.33 oz. (9.5 gms)

Timing & weather

Do not treat soil that is water-saturated or frozen.
Do not treat when raining.
Do not make on-grade applications when sustained wind speeds are above 10 mph (at application site) at nozzle end height.

Use restrictions 8

Do not use this product for pre-construction soil treatment under concrete slabs.
Do not allow people or pets to contact contaminated areas or to reoccupy the contaminated area until the clean-up is completed.
Do not treat soil that is water-saturated or frozen.
Do not treat when raining.
Do not allow treatment to run off from the target area.
Do not apply within 10 feet of storm drains.
Do not apply within 25 feet of aquatic habitats (such as, but not limited to lakes, reservoirs, rivers, permanent streams, marshes, or natural ponds, estuaries, and commercial fish farm ponds).
Do not make on-grade applications when sustained wind speeds are above 10 mph (at application site) at nozzle end height.

Label SDS

Publication withheld. This catalog record has no active evidence summary, so its document and any extracted directions remain unavailable while identity and document role are reviewed.

Document text and citations

Extracted text is retained internally for document review and page-level citation checks. The complete third-party text is not republished here; use the document viewer above.

Reference only. Always read and follow the most current EPA-approved label on the product container. State and local restrictions may apply that are not reflected in this digitised copy. Verify the EPA registration number and revision date before use.