SaniDate HC

BioSafe · Hydrogen Peroxide · EPA Reg 70299-31 · Insecticide Document last checked 2026-05-30

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. · EPA registration data for Reg. 70299-31 →

SaniDate HC is a liquid disinfectant containing Hydrogen Peroxide (23.0%) and Peroxyacetic Acid (28.0%). It is designed for use as a hard surface sanitizer/disinfectant to control a wide range of pathogens, including bacteria, viruses, fungi, and spores. This product is intended for use in various settings such as agricultural facilities, greenhouses, and public water systems. It can be applied via drip irrigation, sprinklers, micro-sprinklers, or flood irrigation. When used in irrigation, it helps control bacteria and pathogens in the water supply. Key handling notes include: it is a strong oxidizing agent and a corrosive material; it requires specific Personal Protective Equipment (PPE) including chemical-resistant gloves, protective eyewear, and respiratory protection if misting occurs. Always follow specific dilution rates and mixing instructions to ensure efficacy and safety. Do not contaminate water sources with this product.

Areas treatable (1)

Hard surfaces, irrigation water, greenhouse surfaces

Application instructions from the label 1

Hard surfaces, irrigation water, greenhouse surfaces

Can be used for surface disinfection or as an irrigation water treatment.

Location: Both

Mixing instructions 1

For pests	Location	Per	Finished strength	Label notes
Bacteria, viruses, fungi, spores	Irrigation systems/Hard surfaces	1,644,000-1,250,000	5.0-2.0 fl. oz. per 1,000 gallons of water	For irrigation water treatment to control bacteria/pathogens.

Worker safety

Re-entry interval (REI) 0

PPE required Chemical-resistant gloves, protective eyewear (chemical resistant goggles, face shield, or safety glasses), chemical resistant clothing, and NIOSH-approved respiratory protection if misting/spraying occurs.

Use restrictions 3

Do not apply through any irrigation system inconsistent with labeling.
Do not contaminate water sources.
Do not use in areas where it may cause phytotoxicity to plants unless specified.

Catalog source document available. The local copy is still withheld until its exact product identity, role, and full file hash are accepted. Open the catalog source label ↗ and verify the product name, EPA registration number, and revision before relying on it.

Publication withheld. This catalog record has no active evidence summary, so its document and any extracted directions remain unavailable while identity and document role are reviewed.

Document text and citations

Extracted text is retained internally for document review and page-level citation checks. The complete third-party text is not republished here; use the document viewer above.

Reference only. Always read and follow the most current EPA-approved label on the product container. State and local restrictions may apply that are not reflected in this digitised copy. Verify the EPA registration number and revision date before use.