SaniDate 16.0 WWT

BioSafe · Hydrogen Peroxide · EPA Reg 8743-19-70299 · Insecticide Document last checked 2026-05-30

← Back to SaniDate 16.0 WWT product overview

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. · EPA registration data for Reg. 8743-19-70299 →

SaniDate 16.0 WWT is a peroxyacetic acid-based antimicrobial agent used for controlling bacteria, fungi, clams, oysters, and other aquatic invertebrates. It is specifically formulated for use in manufacturing processes involving paper, pulp, and paperboard, as well as in water systems such as cooling towers, evaporative condensers, air washers, and recirculating water systems. The active ingredients are Hydrogen Peroxide (22.8%) and Peroxyacetic Acid (16.2%). The product can be applied as a continuous feed or via shock dosing depending on the specific water system and infestation level. When used in influent water systems, it helps maintain microbiological control. Users should be aware that the product is corrosive; it must be handled with appropriate personal protective equipment, including long-sleeved shirts, long pants, rubber gloves, and eye protection. It is also important to note that the product is not for use in dietary applications or for direct contact with food/drink. Always follow specific dilution and mixing instructions for the target application to ensure efficacy and safety.

Pests covered (1)

bacteria, fungi, clams, oysters, and other aquatic invertebrates

Areas treatable (1)

Paper, pulp, and paperboard manufacturing; cooling towers, evaporative condensers, air washers, and recirculating water systems

How to treat each type of area 1

Paper, pulp, and paperboard manufacturing; cooling towers, evaporative condensers, air washers, and recirculating water systems

Target pest	Location	Rate	Unit	Dilution	Label notes
bacteria, fungi, clams, oysters, and other aquatic invertebrates	Both	Varies by application	oz.	See mixing instructions	Not for use in dietary applications or for direct contact with food/drink.

Mixing instructions 3

For pests	Location	Amount	Per	Label notes
Microbiological control in influent water systems	Indoor	0.1-1.82	fl. oz.	Based on 1,000 gallons of process water; dosage is 0.1-1.82 fl. oz. per 1,000 gallons.
Shock dose for water systems	Indoor	0.8-1.28	lb. (dry basis) per 1,000 gallons	Dosage is 0.8-1.28 lb. per 1,000 gallons of process water.
Continuous dosing for water systems	Indoor	1.4-5.0	fl. oz. per 1,000 gallons	Used to maintain microbiological control.

Worker safety

PPE required Long-sleeved shirt, long pants, rubber gloves (barrier laminate or butyl rubber, nitrile, or neoprene), chemical resistant footwear, eye protection (goggles and face shield), and NIOSH-approved respirator with organic vapor (OV) cartridge and N95 or P100 filter if required.

Use restrictions 4

Not for use in dietary applications
Not for use in direct contact with food or drink
Do not use in kidney dialysis equipment
Do not discharge effluent containing this product into sewers without previous notifying the local sewage plant authority

Label SDS

Catalog source document available. The local copy is still withheld until its exact product identity, role, and full file hash are accepted. Open the catalog source label ↗ and verify the product name, EPA registration number, and revision before relying on it.

Publication withheld. This catalog record has no active evidence summary, so its document and any extracted directions remain unavailable while identity and document role are reviewed.

Document text and citations

Extracted text is retained internally for document review and page-level citation checks. The complete third-party text is not republished here; use the document viewer above.

Reference only. Always read and follow the most current EPA-approved label on the product container. State and local restrictions may apply that are not reflected in this digitised copy. Verify the EPA registration number and revision date before use.