Chemicalsbasftermidor-80-wg-termiticide-insecticide

Termidor® 80 WG Termiticide/Insecticide

BASF · Fipronil · EPA Reg 499-546 · Insecticide Document last checked 2026-05-30

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. · EPA registration data for Reg. 499-546 →

Termidor SC is an insecticidal liquid formulation used to control termites and other pests that attack wood. It is applied by creating horizontal barriers in concrete slabs or basements and vertical barriers along the perimeter of foundation walls and beams. It can also be used for pre-construction termite treatments using the trenching method.

Pests covered (2)
termitas y otras plagas que atacan la maderatermitas
Areas treatable (3)
barreras horizontales (losas de concreto en el suelo o en sótanos)barreras verticales a lo largo del perímetro interior y exterior de las paredes del cimiento, y alrededor de las vigas y demás elementos de cimentacióntratamientos contra termitas anteriores a la construcción

How to treat each type of area 3

barreras horizontales (losas de concreto en el suelo o en sótanos)

Target pest Rate Unit
termitas y otras plagas que atacan la madera 1.0 a 1.5 galones por cada 10 pies cuadrados

barreras verticales a lo largo del perímetro interior y exterior de las paredes del cimiento, y alrededor de las vigas y demás elementos de cimentación

Target pest Rate Unit
termitas y otras plagas que atacan la madera 2 galones por cada 10 pies lineales por pie de profundidad

tratamientos contra termitas anteriores a la construcción

Al usar el método de zanjado, las zanjas deben tener una profundidad mínima de 6 pulgadas (no más profundas que la parte inferior de la zapata), y un ancho que no exceda 6 pulgadas.

Target pest
termitas

Mixing instructions 16

For pests Amount Per Finished strength
termiticida/insecticida 0.4 1.0 gal 0.03%
termiticida/insecticida 10.0 25 gal 0.03%
termiticida/insecticida 20.0 (1 pt + 4 fl oz) 50 gal 0.03%
termiticida/insecticida 39.0 (1 qt + 7 fl oz) 100 gal 0.03%
termiticida/insecticida 0.8 1.0 gal 0.06%
termiticida/insecticida 19.0 (1 pt + 3 fl oz) 25 gal 0.06%
termiticida/insecticida 39.0 (1 qt + 7 fl oz) 50 gal 0.06%
termiticida/insecticida 78.0 (2 qt + 14 fl oz) 100 gal 0.06%
termiticida/insecticida 1.2 1.0 gal 0.09%
termiticida/insecticida 29.0 (1 pt + 13 fl oz) 25 gal 0.09%
termiticida/insecticida 59.0 (1 qt + 27 fl oz) 50 gal 0.09%
termiticida/insecticida 117.0 (3 qt + 21 fl oz) 100 gal 0.09%
termiticida/insecticida 1.6 1.0 gal 0.125%
termiticida/insecticida 39.0 (1 qt + 7 fl oz) 25 gal 0.125%
termiticida/insecticida 78.0 (2 qt + 14 fl oz) 50 gal 0.125%
termiticida/insecticida 156.0 (1 gal + 28 fl oz) 100 gal 0.125%

Timing & weather

Use restrictions 3

Label SDS
Active ingredient Fipronil
Catalog source document available. The local copy is still withheld until its exact product identity, role, and full file hash are accepted. Open the catalog source label ↗ and verify the product name, EPA registration number, and revision before relying on it.
Publication withheld. This catalog record has no active evidence summary, so its document and any extracted directions remain unavailable while identity and document role are reviewed.

Document text and citations

Extracted text is retained internally for document review and page-level citation checks. The complete third-party text is not republished here; use the document viewer above.
Reference only. Always read and follow the most current EPA-approved label on the product container. State and local restrictions may apply that are not reflected in this digitised copy. Verify the EPA registration number and revision date before use.