TURFCIDE 400

AMVAC · EPA Reg 5481-8992 · Fungicide Document last checked 2026-05-30

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. · EPA registration data for Reg. 5481-8992 →

Turficide 400 is a flowable turf fungicide containing 40.0% Pentachloronitrobenzene (PCNB) by weight. It is designed for the prevention and control of certain soil-borne diseases in non-residential turf, such as golf course greens, fairways, sod farms, industrial parks, and professional/college athletic fields. It controls diseases including Brown Patch (Rhizoctonia solani), Dichondra, Anthracnose (Colletotrichum cereali), Melting Out/Leaf Spot, Dollar Spot, and Gray Snow Mold/Pink Snow Mold. Application involves mixing the product with water and applying it to the turf, followed by immediate irrigation with 1/4 inch of water to move the product into the soil thatch layer. For certain diseases like Gray Snow Mold, applications are limited to fall and winter. Users must follow specific resistance management strategies, such as rotating with fungicides from different groups. Note that this product is toxic to fish and aquatic organisms and should not be applied to areas where water is present or to areas subject to flooding. It is prohibited for use on residential lawns, school yards, and parks.

Pests covered (5)

Brown Patch (Rhizoctonia solani)DichondraBrown Patch, AnthracnoseMelting Out/Leaf Spot, Dollar SpotGray Snow Mold, Pink Snow Mold

Areas treatable (5)

Warm climate grasses (St. Augustine, Bermuda)DichondraCool climate grasses (Bluegrass, Ryegrass, Fescue, Bent)All turf typesCool climate grass

How to treat each type of area 5

Warm climate grasses (St. Augustine, Bermuda)

First sign of disease or preventative

Target pest	Location	Rate	Unit	Dilution	Label notes
Brown Patch (Rhizoctonia solani)	Outdoor	16 to 24	fl. oz. per 1000 sq. ft.	1 to 10 gallons of water	If disease is severe or reappears, reapply area 3 to 4 weeks later. Irrigate with 1/4 inch water after application.

Dichondra

Target pest	Location	Rate	Unit	Dilution	Label notes
Dichondra	Outdoor	16 to 24	fl. oz. per 1000 sq. ft.	5 to 10 gallons of water	Irrigate with 1/4 inch water after application.

Cool climate grasses (Bluegrass, Ryegrass, Fescue, Bent)

First sign of disease; repeat every 7 to 10 days during warm, damp weather

Target pest	Location	Rate	Unit	Dilution	Label notes
Brown Patch, Anthracnose	Outdoor	5 to 6	fl. oz. per 1000 sq. ft.	1 to 10 gallons of water	Do not apply at daytime temperatures of 85°F or higher. Irrigate with 1/4 inch water after application.

All turf types

Preventative in spring/fall or for existing infections at higher rates

Target pest	Location	Rate	Unit	Dilution	Label notes
Melting Out/Leaf Spot, Dollar Spot	Outdoor	11 to 16	fl. oz. per 1000 sq. ft.	1 to 10 gallons of water	Do not apply at daytime temperatures of 85°F or higher. Irrigate with 1/4 inch water after application. Mowing may not occur one day after application.

Cool climate grass

Apply prior to first snowfall or when temperatures below 60°F and extended wet conditions are expected

Target pest	Location	Rate	Unit	Dilution	Label notes
Gray Snow Mold, Pink Snow Mold	Outdoor	12 to 16	fl. oz. per 1000 sq. ft.	1 to 10 gallons of water	In absence of snow cover, apply 3 to 6 fl. oz. at 4 to 6 week intervals. Limited to fall and winter (Oct-March), max 3 applications per season. Irrigate with 1/4 inch water after application.

Mixing instructions 1

For pests	Location	Amount	Per	Finished strength	Label notes
All listed diseases	Outdoor	Varies by disease	1000 sq. ft.	Varies	Mix specified amount in 1 to 10 gallons of water. Always irrigate with 1/4 inch of water immediately after application.

Worker safety

Re-entry interval (REI) 12 hours (for agricultural use under WPS)

PPE required Long-sleeved shirt and long pants; Chemical-resistant gloves (barrier laminate, nitrile rubber, neoprene rubber, or Viton); Shoes plus socks.

Timing & weather

For Gray Snow Mold: Fall and Winter (October - March) only.
Do not apply at temperatures of 85°F or higher for cool climate grasses/Melting Out.
Avoid application if area is subject to flooding or heavy rainfall.

Use restrictions 5

Prohibited on golf course: residential sites, school yards, parks, playgrounds, and athletic fields (except professional/college).
Do not apply by air.
Do not graze treated areas or feed clippings to livestock.
Do not apply at daytime temperatures of 85°F or higher for certain grass types.
Do not contaminate water or aquatic organisms.

Label SDS

Publication withheld. This catalog record has no active evidence summary, so its document and any extracted directions remain unavailable while identity and document role are reviewed.

Document text and citations

Extracted text is retained internally for document review and page-level citation checks. The complete third-party text is not republished here; use the document viewer above.

Reference only. Always read and follow the most current EPA-approved label on the product container. State and local restrictions may apply that are not reflected in this digitised copy. Verify the EPA registration number and revision date before use.