According to the label From the product label
These details were extracted from this product's label PDF.
The label is the law.
Confirm every rate, site, restriction and safety requirement against the label before mixing or applying.
Check for a
state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below.
·
EPA registration data for Reg. 5481-9041 →
Mocap® EC is a restricted-use nematicide designed specifically for use on non-bearing blueberries in the state of Oregon. The active ingredient is Ethoprophos (O-Ethyl, S-Dipropyl Phosphorodithioate) at a concentration of 69.6%. It is used to control symphylans. The product is applied to the soil, where it must be incorporated into the top 2 to 4 inches of soil to be effective. There are two primary application methods: Method 1 involves broadcasting a sufficient water and product solution immediately ahead of equipment like a double disc or rotary cultivator to incorporate the solution; Method 2 involves broadcasting the solution and immediately applying 1 to 2 inches of overhead irrigation to incorporate the product. If using irrigation, the product must be applied in a band at least 2 feet wide over the row. A minimum waiting period of 3 days is required between application and planting blueberries. Users must be careful not to apply to established, bearing plants or to blueberries harvested within the last year. The product is highly toxic and requires specific handling as a restricted-use pesticide.
Pests covered (2)
SymphylansNematodes, Symphylans
Areas treatable (1)
Non-bearing blueberries
How to treat each type of area 1
Non-bearing blueberries
| Target pest |
Location |
Rate |
Unit |
Label notes |
| Symphylans |
Outdoor |
1.33 |
quarts/acre |
Must be incorporated into top 2-4 inches of soil. |
Mixing instructions 1
| For pests |
Location |
Amount |
Per |
Label notes |
| Symphylans |
Outdoor |
1.33 |
quarts |
Mix with sufficient water and broadcast. If using irrigation, apply in a band at least 2 feet wide over the row. |
Worker safety
Re-entry interval (REI)
48 hours
PPE required
Wear Personal Protective Equipment (PPE) listed for applicators and other handlers when making adjustments or repairs on the chemigation system.
Timing & weather
- Sufficient moisture should be present at application for symphylans to be active in the top 4-6 inches of soil.
- Wait a minimum of 3 days before planting blueberries after application.
Use restrictions 10
- Do not make more than one application per year.
- Do not exceed 1.33 quarts (2 lbs ai/a) per acre.
- Do not apply to established, bearing plants.
- Do not apply to blueberries that have been previously harvested, or as a spot treatment to a non-bearing plant within a field of established, bearing plants.
- Do not harvest blueberries treated under this registration for at least 1 year (365 days) starting from the date the product was applied.
- Do not graze livestock in treated areas. Do not feed treated crop to livestock.
- Do not release spray at a height greater than 20 inches above the ground.
- Do not apply by any method of application not stated on this 24(c) SLN label.
- Do not apply by air or through irrigation systems, other than drip irrigation systems specified on this label.
- Do not use in areas of known endangered avian species occurrence during breeding season.
Publication withheld. This catalog record has no active evidence summary, so its document and any extracted directions remain unavailable while identity and document role are reviewed.